eISSN:2278-5299

International Journal of Latest Research in Science and Technology

DOI:10.29111/ijlrst   ISRA Impact Factor:3.35,  Peer-reviewed, Open-access Journal

A News Letter Sign UP!
AN EXPERIMENTAL METAL MATERIAL AS HEAT ABSORBENT MATERIAL IN THE SOLAR OVEN

Research Paper Open Access

International Journal of Latest Research in Science and Technology Vol.3 Issue 4, pp 224-227,Year 2014

AN EXPERIMENTAL METAL MATERIAL AS HEAT ABSORBENT MATERIAL IN THE SOLAR OVEN

Zainoor Hailmee Solihin, Wirachman Wisnoe

Correspondence should be addressed to :

Received : 22 August 2014; Accepted : 29 August 2014 ; Published : 31 August 2014

Share
Download 125
View 178
Article No. 10382
Abstract

Thermal energy storage is an important factor to be considered in the study of solar energy. This is because at night the earth is protected from direct sunlight. Modern energy needs require continuous energy available. Metal is one of the ingredients used to store solar energy in the form of heat due to its nature as a good conductor of heat. The purpose of this study is to analyze the metal as a thermal energy storage material for use in a solar oven. Aluminum and copper were selected for the study. This experimental method has been carried out in a stagnant environment. The data obtained from experimental methods are tabulated in the form of graphs. Results of the experiments that have been conducted show that the use of aluminum and copper in the solar oven can increase the heat stored in an enclosed space. Aluminum metal shows an increase in temperature better than copper at noon when solar radiation readings maximum, but the temperature of aluminum also decreased faster than copper where the temperature readings in the solar oven is the same in the evening for the two metals. In conclusion, aluminum can act as thermal storage for solar oven and use of aluminum can be used to increase the oven temperature even higher, especially when solar radiation received is high. Copper is suitable for use when solar radiation received is not fixed, especially when clouds cover the sun.

Key Words   
Solar Oven, solar radiation, solar thermal
Copyright
References
  1. Kariuki Nyahoro, Richard R Johnson, John Edwards, Simulated Performance Of Thermal Storage In A Solar Cooker. Solar Energy, 1997. 59: p. 11-17.
  2. Atul Sharma, C.R. Chen , V.V.S. Murty, Anant Shukla, Solar cooker with latent heat storage systems: A review. Renewable and Sustainable Energy Reviews, 2009. 13: p. 1599–1605.
  3. Klemens, Schwarzer, Maria Eugenia Vieira da Silva, Characterisation and design methods of solar cookers. Solar Energy, 2008. 82: p. 157–163.
  4. Ishan, Pallav Purohit, Instrumentation error analysis of a box-type solar cooker. Energy Conversion and Management, 2009. 50: p. 365–375.
  5. Sahoo, D. Buddhi And L. K., Solar Cooker With Latent Heat Storage: Design And Experimental Testing. Energy Conversion Management, 1997. 38(5): p. 493-498.
  6. Turkmen, A K Binark and N, Modelling Of A Hot Box Solar Cooker. Energy Conversion and Management, 1996. 37(3): p. 303-310.
  7. Avala Raji Reddy, A.V Narasimha Rao, Prediction and experimental verification of performance of box type solar cooker. Part II: Cooking vessel with depressed lid. Energy Conversion and Management, 2008. 49: p. 240–246.
  8. Nahar, N. M., Design and development of a large size non-tracking solar cooker. Journal of Engineering Science and Technology, 2009. 4(School of Engineering, Taylor’s University College): p. 264-271.
  9. M. Muthusivagami, R. Velraj, R. Sethumadhavan, Solar cookers with and without thermal storage—A review. Renewable and Sustainable Energy Reviews 2010. 14: p. 691–701.
  10. Zainoor Hailmee Solihin, Noriah Yusof, and Wan Sulaiman. The Influence of Malaysia Climate in Varying the Temperatures on the Solar Oven Performance. in International Conference on Advance in Mechanical Engineering (ICAME 2010). 2010. Shah Alam, Selangor.
  11. Ahmad, Bashir, Users And Disusers Of Box Solar Cookers In Urban India — Implications For Solar Cooking Projects. Solar Energy, 2000. 69: p. 209–215.
  12. Zainoor Hailmee Solihin, Wirachman Wisnoe, Noriah Yusoff, Wan Sulaiman Wan Mohammad, Theoretical and Experimental Analysis of Double Layer Quintuple Solar Oven. Applied Mechanics and Materials, 2013. 393: p. 759-766.
  13. S. Ayu Wazira Azhari, Azami Zaharim, Mohamad Al Ghoul, A New Approach for Predicting Solar Radiation in Tropical Environment Using Satelite Imagges - Case Study of Malaysia. Environment and Development, 2008. 4: p. 373-378.
  14. Herliyani Suharta, K. Abdullah, A. Sayigh, The Solar Oven: Development And Field-Testing Of User-Made Designs In Indonesia. Solar Energy, 1998. 64: p. 121-132.
  15. Nandwani, Sham S. , Otoniel Fernandez G., Design, construction and experimental study of a domestic solar oven cum drier in the climate of Costa Rica. Solar World Congress, Budapest, Hungary 1993.

 

To cite this article

Zainoor Hailmee Solihin, Wirachman Wisnoe , " An Experimental Metal Material As Heat Absorbent Material In The Solar Oven ", International Journal of Latest Research in Science and Technology . Vol. 3, Issue 4, pp 224-227 , 2014


Responsive image

MNK Publication was founded in 2012 to upholder revolutionary ideas that would advance the research and practice of business and management. Today, we comply with to advance fresh thinking in latest scientific fields where we think we can make a real difference and growth now also including medical and social care, education,management and engineering.

Responsive image

We offers several opportunities for partnership and tie-up with individual, corporate and organizational level. We are working on the open access platform. Editors, authors, readers, librarians and conference organizer can work together. We are giving open opportunities to all. Our team is always willing to work and collaborate to promote open access publication.

Responsive image

Our Journals provide one of the strongest International open access platform for research communities. Our conference proceeding services provide conference organizers a privileged platform for publishing extended conference papers as journal publications. It is deliberated to disseminate scientific research and to establish long term International collaborations and partnerships with academic communities and conference organizers.