Sign In
Register
eISSN:2278-5299

International Journal of Latest Research in Science and Technology

DOI:10.29111/ijlrst   ISRA Impact Factor:3.35,  Peer-reviewed, Open-access Journal

A News Letter Sign UP!
Studies of workpieces of Atomized Aluminum powder of 99.5% purity

Research Paper Open Access

International Journal of Latest Research in Science and Technology Vol.1 Issue 1, pp 89-94,Year 2012

STUDIES OF WORKPIECES OF ATOMIZED ALUMINUM POWDER OF 99.5% PURITY

Yogender,Ranbir Singh

Correspondence should be addressed to :

Received : 02 June 2012; Accepted : 25 June 2012 ; Published : 30 June 2012

Share
Download 125
View 178
Article No. 10016
Abstract

Powder Metallurgy is a process that has been utilized for centuries, dating back to 2500 B.C. It has become one of the most common, most efficient processing techniques. Powder metallurgy components are being used in ever increasing quantities in a wide variety of industries as the technology combines unique technical features with cost effectiveness. Basic experiments were conducted on Copper and Aluminum metal powder performs. Atomized Aluminum powder of purity 99.5% and finer than 100 m was used throughout the experiments. The results were plotted.

Key Words   
powder metallurgy, aluminum powder
Copyright
References
  1. A.S. Khan, B. Farrokh and L. Takacs, Material Science Engg. 2008; Vol. 489: p77–84.
  2. H.J. Choi, S.W. Lee, J.S. Park and D.H. Bae, Scripta Mater 2008; Vol. 59: p1123–26.
  3. T.T. Sasak, K. Hono, J. Vierke, M. Wollgarten and J. Banhart, Material Science Engg. 2008; Vol. 490: p343-47.
  4. T.T. Sasaki, T. Ohkubo and K. Hono, “Microstructure and mechanical properties of bulk nanocrystalline Al–Fe alloy processed by mechanical alloying and spark plasma sintering” Acta Materialia 2009; Vol. 57: p3529-38.
  5. S. Scudino, G. Liu, M. Sakaliyska, K.B. Surreddi and J. Eckert “Powder metallurgy of Al-based metal matrix composites reinforced with Al3Mg2 intermetallic particles to improve mechanical properties” Acta Materialia 2009; Vol. 57: p4529-38.
  6. S. Scudino, K.B. Surreddi, S. Sagar, M. Sakaliyska and J.S. Kim, Material Science Engg. 2008; Vol. 43: p4518-22.
  7. S. Scudino, G. Liu, K.G. Prashanth, B. Bartusch, K.B. Surreddi and B.S. Murty, Acta Materialia 2009; Vol. 57: p2029-34.
  8. E.G. Thomson and S. Kobayashi, “Indicated directions of materials forming research”. University of California, Berkeley, California,1968; p211-33.
  9. A.K. Jha and S. Kumar “Forging of metal power preform ring”, Journal of Mechanical working Technology 1985; Vol.12: p13-33.
  10. R. Sagar and B.L. Juneja “An upper Bound Solution for closed die forging of Hexagonal shapes”. Int. Journal of Mechanical Tool Design 1980; Vol. 20: p67-72.
  11. D. Sherif, E.I. Wakil, “Plasticity of Sintered Iron-Powder Compacts” 15th International MTDR conference Birmingham 1975; p645-50.
  12. G. Sutradhar, A. Abdulla, A.K. Jha. and S. Kumar, “Closed die axisymmetric forging of sintered aluminium preforms”. Journal of Material Processing Technology 1997; Vol.68: p19-22.
  13. H.N. Tiwari and R. Sharan, “Forging of Metal Powder preform for Magnetic Applications” in Europe International Powder Metallurgy conference, Florence-Italy, 1982; p82-87.
  14. G. Sutradhar, A.K. Jha and S. Kumar “Cold Forging of sintered square metal powder plate” European powder metallurgy Association 1994; Vol.1: p765-70.
  15. G. Sutradhar, A.K. Jha and S. Kumar “Production of sintered forged components” Journal of Materials processing technology, 1994; Vol. 41: p143-69.
  16. S. Shima and M. Oyane, “ A computer simulation techniques to estimate Die load and energy during sinter forging process”. IE(I) Journal-PR,2002; Vol 83: p27-33.
  17. G.L. Baraya and W. Jhonson, Advances in Machine Tool Design and Research, Peragamon Press, Oxford1964; p449-54.
  18. E.G. Thomson and S. Kobayashi, “Indicated directions of materials forming research”. University of California, Berkeley, California, 1969; p211-33.
  19. A. Tomilinson and J. D. Stringer, Journal of Iron & Steel Inst. 1957; p157-61.
  20. I.Y. Tarnowski, New Researches in the field of technology international conference, Gustekhizdat, Moscow1950; p253-59.
To cite this article

Yogender,Ranbir Singh , " Studies Of Workpieces Of Atomized Aluminum Powder Of 99.5% Purity ", International Journal of Latest Research in Science and Technology . Vol. 1, Issue 1, pp 89-94 , 2012

Responsive image

MNK Publication was founded in 2012 to upholder revolutionary ideas that would advance the research and practice of business and management. Today, we comply with to advance fresh thinking in latest scientific fields where we think we can make a real difference and growth now also including medical and social care, education,management and engineering.

Responsive image

We offers several opportunities for partnership and tie-up with individual, corporate and organizational level. We are working on the open access platform. Editors, authors, readers, librarians and conference organizer can work together. We are giving open opportunities to all. Our team is always willing to work and collaborate to promote open access publication.

Responsive image

Our Journals provide one of the strongest International open access platform for research communities. Our conference proceeding services provide conference organizers a privileged platform for publishing extended conference papers as journal publications. It is deliberated to disseminate scientific research and to establish long term International collaborations and partnerships with academic communities and conference organizers.